Acincy.168 net.general utzoo!decvax!ucbvax!ihnss!mhtsa!harpo!chico!duke!cincy!chris Tue Aug 18 15:24:20 1981 Hayes Smartmodem Help? Would someone please help me with this query? Also, could someone that has access to ARPA shove it into unix-wizards? The ucbvax!unix-wizards mailbox seems to be broken. Chris Kent >From ucbvax!~MAILER~DAEMON~ Sun Aug 16 19:20:40 1981 remote from pur-ee Originating from ucbvax at Sun Aug 16 12:40:39 1981 To: pur-ee!cincy!duke!chico!randvax!uucp Subject: Unable to deliver mail ----- Transcript of session follows ----- unix-wizards@sri-unix... Mail has been disallowed between the Arpanet and the Uucp net unix-wizards@sri-unix... Service unavailable ----- Unsent message follows ----- >From pur-ee!cincy!duke!chico!randvax!uucp Sun Aug 16 12:37:03 1981 Originating from randvax at Fri Aug 14 12:07:31 1981 Date: Friday, 14 Aug 1981 12:07-PDT To: chico!duke!cincy!chris Sorry, not an Arpanet gateway! *--------------RETURNED MESSAGE---------------* I am resending this query, since the first one apparently got lost: We have just purchased a Hayes Stack Smartmodem ($279 for a Bell 103 direct connect auto-answer/originate modem with autodialer) and would like to use it to automate our uucp setup (I dial everything by hand now). Has anyone out there done this already? I suspect that it will be necessary to either write a phony dn driver that links ito the dh driver (it all goes across one serial line), or something like that. Does anyone out there have experience with this (or a similar setup) that could help? I won't be able to start creating code for a week or two because of other pressures. By the way, the unit is really slick -- I checked it out this morning and was quite impressed. It won't do 1200 baud, unfortunately, but it is a great boon if you are on a low budget (read CHEAP). We had thought that it would be nice to be able to use the unit for both dial in and out, but the difficulties of turning a line around on UNIX seem incredible. The scenario would be to have it be a dial in line until someone did a uucico or cu, and then, if no one is logged in, make the line not be a line available for logging in, and proceed, resetting everything when done. I see that you have to hack at /etc/ttys, kill off a login process, and make sure that init doesn't start another one. On top of that, you have to make sure no one is logged in there! Help will be appreciated, Chris Kent (cincy!chris) ----------------------------------------------------------------- gopher://quux.org/ conversion by John Goerzen of http://communication.ucsd.edu/A-News/ This Usenet Oldnews Archive article may be copied and distributed freely, provided: 1. There is no money collected for the text(s) of the articles. 2. The following notice remains appended to each copy: The Usenet Oldnews Archive: Compilation Copyright (C) 1981, 1996 Bruce Jones, Henry Spencer, David Wiseman.